
Garden gates supplied and fitted
Side gates and garden gates that hang true and lock properly.
A gate gets used every day, so it has to swing freely, close on its own latch and stay secure. We supply and fit timber and metal garden gates and side gates across Coventry and the West Midlands, hung on posts strong enough to carry them for years. Over 13 years' experience, a free site visit to measure up, and a fixed quote agreed before any work starts.

Side gates and garden gates we fit
Most of the gates we fit are side gates between the house and the boundary, and gates in garden fences. Each one is measured for its opening, because very few openings are a standard size or perfectly square.
- Wooden side gates in close board or featheredge styles, to match your fence
- Framed and braced timber garden gates
- Metal side gates for extra strength and security
- Pedestrian gates in front garden walls and fences
- Gates made to measure for awkward or wide openings
Timber or metal gates?
Wooden garden gates are the most popular choice because they match timber fencing and are easy to make to measure. A well-built timber gate has a braced frame on the back so it does not drop at the latch end over time.
Metal gates are slimmer and very strong, and they suit side passages where security matters most. They need far less upkeep than timber, though a painted finish may need touching up over the years.
| Timber gates | Metal gates | |
|---|---|---|
| Look | Matches timber fencing | Slim, modern or traditional ironwork styles |
| Privacy | Full, in close board styles | Depends on the design; some are solid-infilled |
| Security | Good with strong hinges and bolts | Very good |
| Upkeep | Treat every year or two | Low; touch up paint if chipped |
| Made to measure | Easy | Yes, with a longer lead time |
Strong posts make a good gate
A gate is a heavy, moving weight on one side of a post. If the post is undersized or shallow, the gate drops, catches on the ground and stops latching. That is the most common gate problem we see.
We hang gates on substantial posts set deep in concrete, or fix them to the house wall where that is the better anchor. On wet clay ground a well-set post stops the slow lean that throws a gate out of line.
Hinges, latches and locks
Good ironmongery is a small part of the price and makes a big difference. We fit heavy-duty hinges sized to the gate, a latch that closes cleanly, and bolts top and bottom on side gates so they cannot be forced from outside.
For side gates, which are often the easiest way into a back garden, a lockable latch or padlockable bolt is worth having. We fit the lock on the inside so it cannot be reached over the top.
Measuring up and planning
Before we order or build a gate we check the width, the height, which way it should open and whether the ground rises under the swing. A gate that opens inwards and uphill will scrape unless we allow for it.
Gates follow the same permitted development height rules as fences: up to 2 metres high, or 1 metre next to a road used by vehicles or its footpath. If you are replacing a gate as part of a new boundary, we can fit it as part of a fence installation. For a sagging old gate or a broken post, our fence repair service covers that too.
What happens, step by step
Ask for a quote
Tell us about the opening and the gate you want on our quote form.
Measure up
We visit to measure, check the posts and the ground, and talk through styles.
Fixed quote
One written price for the gate and fitting before anything is ordered.
Fitted
We set the posts, hang the gate and adjust it so it swings and latches cleanly.
What is included
- Free site visit to measure the opening and check the ground
- Timber or metal gate supplied, made to measure where needed
- New gate posts set in concrete, or fixings to the house wall
- Heavy-duty hinges, latch and bolts fitted
- Old gate and posts taken away responsibly
Garden gates FAQs
Do you supply the gate or do I need to buy one?
We supply and fit. We measure your opening and source or make a gate to suit it, so it fits properly first time. If you already have a gate you want hung, ask and we will look at whether it suits the opening.
Why does my garden gate keep dropping?
Usually the hinge-side post has moved, or the gate has no diagonal brace to stop it sagging. We fix it by resetting or replacing the post and, where needed, fitting a properly braced gate.
Can you make a gate to fit an odd-sized opening?
Yes. Many side passages are not a standard width. Timber gates are easy to make to measure, and metal gates can be made to size too, though they take longer to arrive.
How high can a garden gate be?
You can usually go up to 2 metres, or 1 metre next to a road used by vehicles or its footpath, without planning permission. Listed buildings and some properties have extra limits, and we check that at the site visit.
Can you match a new gate to my fence?
Yes. We can build timber gates in close board or featheredge styles to match your fence, or fit a new gate as part of a new fence run so they match from the start.
How long does it take to fit a garden gate?
Fitting a gate is often a day's work, including new posts. Made-to-measure gates have a wait before fitting, which we confirm on your quote.
Garden gates near you
We cover the whole West Midlands from Coventry. Pick your town for local details.

Get a fixed price for the job
Tell us what you need and we will come back with a free quote.
