
Driveway cleaning
Moss, oil and black streaks lifted, joint sand put back.
A driveway takes more punishment than any other surface at your house. Tyres, oil drips, leaves from next door's tree and a damp West Midlands winter all leave their mark. We jet wash block paving, concrete, tarmac and imprinted drives from our Coventry base across the region, then re-sand the joints where the clean has taken sand out. You get a fixed quote before we start, and we leave the drive and the road outside tidy.

What a proper driveway clean involves
Pointing a pressure washer at a drive is the easy part. Doing it without blasting the sand out of every joint, streaking the surface or flooding your neighbour's path takes a bit more thought.
We start by clearing weeds and moss from the joints and edges, then treat any oil or tyre marks before the main wash. The surface itself is cleaned with a rotary surface cleaner, which spins the jets inside a hood so the pressure is even and the spray stays low. Edges, steps and corners get a hand lance. Then we rinse the slurry off the drive and away from the house.
- Weeds and moss raked and scraped out of joints first
- Oil, rust and tyre marks pre-treated where they will lift
- Rotary cleaner on open areas for an even, stripe-free finish
- Hand lance for edges, kerbs, steps and around drains
- A full rinse so no dirty slurry is left drying on the surface
Block paving, concrete, tarmac and imprinted drives
Every surface needs a slightly different approach, which is why we ask what your drive is made of when you get in touch.
Block paving is the most common drive we clean, and it needs the joints refilled with kiln-dried sand afterwards. Our block paving cleaning page covers re-sanding and sealing in detail. Concrete and imprinted concrete clean up well but older imprinted drives often have a tired sealer that goes patchy once the dirt is off. Tarmac is softer, especially on a warm day, so we use lower pressure and keep the head moving to avoid scouring the surface.
| Drive surface | What we watch for | After the clean |
|---|---|---|
| Block paving | Joint sand washed out, sunken blocks | Re-sand with kiln-dried sand, optional seal |
| Plain concrete | Oil stains, algae in shady spots | Usually nothing further needed |
| Imprinted concrete | Old sealer flaking or turning white | We will tell you if a reseal is worth looking at |
| Tarmac | Soft surface, loose stone on older drives | Lower pressure, no harsh chemicals |
Oil stains, rust marks and the black spots that won't shift
Fresh oil drips usually lift well with a degreaser before the main wash. Oil that has soaked into concrete or porous blocks for years may fade a long way but leave a shadow. We will tell you honestly on the day what we expect to come out.
Those small black dots spread across a lot of West Midlands drives and patios are usually lichen. They grip the surface hard, and a jet wash alone often leaves a faint mark. A treatment applied after the clean breaks them down over the following weeks as the weather gets to work.
Where the dirty water goes
Street drains usually run straight to local streams and rivers, not to a treatment works. So we use only as much cleaning product as the job needs, and rinse the dirty water towards a border or gravel rather than into the road.
We also sweep up the grit and moss that comes off, bag it and take it away with us. You will not be left with a pile of green sludge at the kerb.
How often should you get your drive cleaned?
Most drives look their best with a clean every couple of years, but a drive under trees or on the shady side of the house will green over faster. Our guide on how often to clean your driveway goes through the signs to look for.
If you are worried a jet wash might harm your blocks, read does pressure washing damage block paving? The short answer: not when it is done at the right pressure with the right kit, and the joints are refilled afterwards.
Driveway cleaning across the West Midlands
We are based in Coventry and clean drives right across the region, from Hinckley and Tamworth over to Stourbridge and Wolverhampton. Busy areas include driveway cleaning in Solihull, Birmingham and our home patch of Coventry.
Plenty of customers have the drive and patio done on the same visit, which saves a second trip. See our patio cleaning page, or ask for both on the quote form.
What happens, step by step
Tell us about the drive
Use our quote form to tell us the surface, rough size and what is bothering you. A couple of photos help.
Fixed quote
We price the job and agree it with you before we book. No surprises on the day.
Clean and treat
We clear the joints, treat stains, clean the whole surface and rinse it down.
Finish and tidy
Block paving is re-sanded, sealing is done if you chose it, and we sweep up and take the waste away.
What is included
- Weed and moss removal from joints and edges
- Pre-treatment of oil and tyre marks where it will help
- Rotary surface clean of the whole drive plus hand lancing of edges and steps
- Re-sanding of block paving joints with kiln-dried sand
- Optional sealing for block paving once it has dried
- Sweep-up of debris and waste taken away
Driveway cleaning FAQs
Do I need to be home while you clean the driveway?
Not for the whole job. We need access to an outside tap and the cars moved off the drive. Plenty of customers leave us to it and come back to a finished drive. We will let you know before we arrive so you can move the car the night before.
Will jet washing damage my block paving?
Not when it is done properly. The risk comes from blasting the joints with a narrow nozzle up close. We use a rotary surface cleaner at a sensible pressure and refill the joints with kiln-dried sand afterwards, which keeps the blocks locked together.
Can you get oil stains off a driveway?
Fresh stains usually come out well. Old oil that has soaked deep into concrete or porous blocks often fades a lot but may leave a faint shadow. We will look at it and tell you what to expect before we start.
How long does it take to clean a driveway?
Many drives on a typical semi are done in a day, re-sanding included. Bigger drives, heavy moss or sealing add time, partly because the surface has to dry before it can be sealed. We confirm the timing with your quote.
When can I park on the drive again?
After a clean and re-sand, usually the same day once we have finished. If we seal the drive, you need to keep cars off until the sealer has cured, and we will tell you how long for the product we use and the weather on the day.
Do you need my water supply?
Yes, we connect to an outside tap. If you do not have one, tell us when you ask for a quote and we will talk through the options.
Driveway cleaning near you
We cover the whole West Midlands from Coventry. Pick your town for local details.
- Driveway cleaning Solihull
- Driveway cleaning Birmingham
- Driveway cleaning Redditch
- Driveway cleaning Bromsgrove
- Driveway cleaning Lichfield
- Driveway cleaning Wolverhampton
- Driveway cleaning Dudley
- Driveway cleaning Sutton Coldfield
- Driveway cleaning Shirley
- Driveway cleaning Halesowen
- Driveway cleaning Walsall
- Driveway cleaning Coventry
- Driveway cleaning Stourbridge
- Driveway cleaning Tamworth
- Driveway cleaning Hinckley
- Driveway cleaning Stratford-upon-Avon

Get a fixed price for the job
Tell us what you need and we will come back with a free quote.
