
Decking cleaning
Green, slippery decks made safe to walk on again.
Timber decking can go from smart to slippery in a single damp winter. Algae settles in the grooves, leaves rot down in the gaps, and the boards turn grey and green. We clean timber and composite decks across Coventry and the West Midlands at a pressure the boards can take, clear the gaps between them and leave the deck safe to walk on. You get a fixed quote before we start.

Why decks get so slippery
A deck is horizontal timber that stays damp for long spells, often in the shadier part of the garden. Algae grows in the grooves of ribbed boards and holds water like a sponge. Add rotting leaves trapped between the boards and you have a surface that is treacherous in wet weather.
It is a safety job as much as a looks job. Steps down to the lawn and the area outside the back door are where people slip, so those are where we start.
Cleaning timber without wrecking it
Softwood decking is easy to damage with a pressure washer. Too much pressure, or a nozzle held too close, tears up the soft grain and leaves the boards furry and rough. That raised grain then holds more dirt and greens over faster.
We keep the pressure low on timber, work along the length of the boards with the grain, and use a surface cleaner where the deck allows. A cleaning treatment does a lot of the work on the algae, so the water does not have to.
- Low pressure on softwood, worked along the grain
- Gaps between boards cleared of leaves and debris
- Extra care on steps, edges and board ends
- Handrails and balustrades cleaned by hand
Timber or composite: different decks, different cleans
Composite decking does not rot or splinter like timber, but it still gets dirty. Mould and algae grow on the film of dirt that settles on the surface, especially in shade. Most composite boards clean up well with a gentler approach.
Manufacturers set their own cleaning guidance for composite boards, and some limit the pressure or the products you can use. If you know the make of your decking, tell us when you ask for a quote and we will follow the maker's guidance.
| Timber (softwood or hardwood) | Composite | |
|---|---|---|
| Main problem | Algae, greying, slippery grooves | Surface mould and grime in shade |
| Pressure | Low, along the grain | Gentle, per the manufacturer's guidance |
| Risk if done badly | Furred, raised grain | Marks or dulling on the surface |
| After the clean | Dry out before any oil or stain goes on | Usually nothing further needed |
After the clean: oil, stain and drying out
A clean timber deck is the right starting point for a fresh coat of decking oil or stain. It needs to dry out properly first, which in the West Midlands can take a few dry days. Putting a finish onto damp wood traps the moisture in.
If boards are soft, split or loose, we will point it out after the clean. Rotten boards are much easier to spot once the green layer is gone.
Decks, patios and drives together
Most decks sit next to a patio or a path, and many customers book them on the same visit. See our patio cleaning page, or our driveway cleaning service for the front of the house.
We cover the whole West Midlands from Coventry. Everything we clean is on our jet washing page.
What happens, step by step
Tell us about the deck
Use the quote form to tell us the size, whether it is timber or composite, and send a photo.
Fixed quote
We agree a price for the deck, steps and rails before we book.
Clean
Gaps cleared, treatment applied, boards cleaned at the right pressure.
Check and tidy
We flag any damaged boards, sweep up and take the debris away.
What is included
- Leaves and debris cleared from between the boards
- Cleaning treatment for algae and mould
- Low-pressure clean along the grain of timber boards
- Steps, handrails and balustrades cleaned by hand
- A note of any soft, split or loose boards we find
- Sweep-up and waste taken away
Decking cleaning FAQs
Can you pressure wash timber decking?
Yes, at low pressure and with care. High pressure tears up the soft grain and leaves the wood furry. We keep the pressure down, work along the grain and let a cleaning treatment shift the algae.
Can composite decking be jet washed?
Often yes, gently, but it depends on the manufacturer. Some set limits on pressure or the cleaners you can use. If you know the make, tell us and we will follow its guidance.
How soon can I oil or stain the deck after cleaning?
Once the timber has dried out properly. That might be a couple of days in summer and longer in cooler, damp weather. Oil on damp wood traps the moisture in.
Will cleaning stop my deck being slippery?
It removes the algae that makes it slippery, which makes a big difference straight away. Shady decks will green over again in time, so a regular clean keeps them safe.
Do you repair or replace decking boards?
On a cleaning visit we point out any rotten or broken boards we find. We also build decks, so if boards need replacing we can quote for that separately.
Decking cleaning near you
We cover the whole West Midlands from Coventry. Pick your town for local details.
- Driveway cleaning Solihull
- Driveway cleaning Birmingham
- Driveway cleaning Redditch
- Driveway cleaning Bromsgrove
- Driveway cleaning Lichfield
- Driveway cleaning Wolverhampton
- Driveway cleaning Dudley
- Driveway cleaning Sutton Coldfield
- Driveway cleaning Shirley
- Driveway cleaning Halesowen
- Driveway cleaning Walsall
- Driveway cleaning Coventry
- Driveway cleaning Stourbridge
- Driveway cleaning Tamworth
- Driveway cleaning Hinckley
- Driveway cleaning Stratford-upon-Avon

Get a fixed price for the job
Tell us what you need and we will come back with a free quote.
